QAV210 Carbon Fiber FPV Quadcopter

・Wheelbase: 210mm
・Weight: 90g
・Fuselage & arm thickness: 3mm
・Camera board & upper board thickness: 1.5mm
・Recommand 1806-2206 motor
・Support up to 5″ propeller

¥2,064

  • 残りわずか
  • お届け日数:3~5日1

4mm Carbon Fiber Frame Kit QAV-X 210 FPV Racing

 Item name:  210mm Frame Kit

Wheelbase: 214mm

Material: Carbon fiber

Arm thickness: 4mm

Thickness of plate: the lower plate 4.0mm, upper 2.0mm side 1.5mm

Recommend parts (package not include):

ESC: 20A-30A

Propeller: 5inch

Battery: 3S 1300mAh ~ 4S 1300mAh

Flight control: CC3D   NAZE32  F3

Motor:  2204/2205/2206/2305

¥4,008

  • 手配中

AWESOME F200 4mm Arm FPV Racing X Frame Carbon Fiber & CNC Aluminum Alloy

Item name: F200 FPV Racing Frame
Wheel base: 200mm
Wing length: 127mm
Weight: 75g
Material: 3K carbon fiber
Thickness of side plate: 2mm
Thickness of bottom plate: 4mm

¥4,296

  • 手配中

Flycolor Raptor-S Tower 30A BLHeli_S ESC + F3 Flight Controller + OSD + PDB(2S-4S)

Con. Current:30A

Burst Current:40A

Lipo Cells:2-4S

Weight:20g

Size:41.5×36×19.6mm

¥9,428

  • 手配中

FLYCOLOR Raptor Tower-S F4 40AESC+F4 Flight Controller with OSD

Specifications:

F4 Flight Controller:

CPU: STM32F405 MCU 

MPU: MPU-6000 SPI

Firmware: OMNIBUSF4SD

Support: PPM, SBUS, Spektrum1024 / 2048 receiver

OSD: yes

 

4-in-1 ESC:

Cells: 2 - 4S LiPo 

Con. current: 40A 

Peak current: 50A 

Firmware: BLHeli - S

Support: DShot, Multishot, Oneshot

¥12,500

  • 在庫あり
  • お届け日数:3~5日1

F4 FLAME Race Spec STM32F405 Flight Controller Built-in BETAFLIGHT OSD 5V BEC PDB Current Sensor

*接続ハーネス無し

STM32F405 F4 Flight Control

-built-in BETAFLIGHT OSD, PID tuning
-built-in 5V/3A BEC
-built-in current sensor
-directly weld PDB

Current: max 300A+
Lipo: 2-6S

¥5,651

  • 手配中

Matek F405-STD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for RC Multirotor FPV Racing Drone

Size: 36x36mm
Mounting hole: 30.5mm
Weight: 7g

MCU: 168MHz STM32F405RGT6
IMU: 32K ICM20602 gyro/accelerometer (SPI)
Baro: BMP280 (I2C)
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
SoftSerial on TX2, S5 or S6 optional
Camera control on S6 or DAC optional
Smartaudio & Tramp VTX protocol supported
Battery Voltage Sensor: 1:10
Current Sensor: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
BEC 5V: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
LDO 3.3V: Max.300mA
I2C1 SDA & SCL: Yes
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes

¥4,226

  • 残りわずか
  • お届け日数:3~5日1

Matek Systems FCHUB-VTX 6~27V PDB 5V/1A BEC w/ 5.8G 40CH 25/200/500mW Switchable Video Transmitter

Weight: 14g (w/ MMCX whip antenna)
Size: 36*45*7mm w/30.5mm mounting
Input voltage: 6~27V(2~6S LiPo)

PDB: 4*30A (4*46A, 5 seconds)
Current Sensor: 184A (Scale 179)
BEC Output: 5V/1A for Camera or FC
VTX: 40 standard 5.8G channels, A/B/E/F/R Band
VTX Output Power: 25, 200, 500mW switchable
Traditional button+LED control of frequency and power
BFCMS (BFOSD & LUA Script) control via FC UART _TX
Video signal & TX5 are ready on FFC connected with MATEK FC F405-OSD
Silicon wires connection with other brands FC
Firmware upgradeable
 VTX Power Consumption: 3.1W Max. @ 500mW
Video Input Impedance: 75 Ohm
Audio Subcarrier Frequency: 6.5 MHz
RF Connector: MMCX
Video Format: NTSC/PAL

¥4,724

  • 残りわずか
  • お届け日数:3~5日1

CoolTech RSFSB PPM SBUS 8CH Compatible Receiver for Futaba S-FHSS 18SZ 18MZ 14SG 10J 8J 6J 4GRS

 

Item Name: Receiver

Frequency: 2.4G

Channel: 8CH

Net Weight: 4.5g

Opreating Voltage: 4.8 ~ 8.4V

Size: 35*18*5mm

Compatible with Futaba T6J T8J T10J T14SG S-FHSS S-SBUS

¥2,653

  • 手配中